Leakage Protector
Leakage Protector is equipped with an automatic water shutoff valve of feed water to prevent damage to the lab should unpredicted happen. The unit is battery operated, does not require external power.
Catalog No.: RAPRC0111
Features:
- Auto valve shut off and sound alarm when water leak is detected
- 9V alkaline battery operated
- Auto valve shut off and alarm at low battery
- Easy installation to the 3/8 inch or 8 mm quick connectors
Specifications:
| Operating voltage | 9 V DC |
| Working current | typical 1.0 mA, maximum 15.0 mA |
| Cable length | 1.5 M to solenoid valve |
| Fitting | 3/8 inch quick connector on 1/2″ male BSP |
| Method of Water leak detection | Conductivity. Put the control unit on the floor near the water purification system |
| Operating temperature | -20～80 oC |
| Maximum inlet pressure | 6 bar (90 psi) |
Suitable for Direct-Pure water systems:
Order Information:
| Description | Catalog No. |
|---|---|
| Leakage Protector | RAPRC0111 |
